Found 77 Products For:

"nickel alloy sheet"

Alloy 625 vs Alloy 718: A Comprehensive Comparison

Alloy 625 is a solid-solution strengthened alloy prized for outstanding corrosion resistance. Alloy 718 is precipitation-hardenable for exceptionally high strength at elevated temperatures. Choose based on corrosion vs strength requirements.

Alloy C-276 vs Alloy 22: A Comprehensive Comparison

Alloy C-276 is the classic nickel-chromium-molybdenum alloy with high Mo and W for reducing acid resistance. Alloy 22 is the upgraded version with higher Cr for superior oxidizing media and localized corrosion resistance. Choose based on your specific media environment.

ASTM B409 Alloy 800HT Plate & Sheet for Creep Service | N08811

Alloy 800HT plate and sheet to ASTM B409 for elevated-temperature equipment where controlled chemistry, annealing and grain size support creep performance. Buyers receive clear grade, condition, dimension, testing and documentation checkpoints; final supply is confirmed…

Nickel 200 vs Nickel 201: A Comprehensive Comparison

Nickel 200 and 201 are commercially pure wrought nickel grades with nearly identical properties. The key difference is carbon content: 200 has 0.15% max for service below 315°C, while 201 has 0.02% max for elevated-temperature applications above 315°C .

430 Ferritic Stainless Steel Sheet & Coil Supplier

Magnetic Type 430 ferritic stainless steel sheet, coil and strip for appliances, kitchen equipment, decorative parts and mildly corrosive environments. Custom slitting, cutting, polishing and MTC 3.1 available.

Nickel 200 | UNS N02200 | 2.4060 | Commercially Pure Nickel

Nickel 200 (UNS N02200 / 2.4060) is commercially pure wrought nickel (99.0% min) with excellent resistance to caustic alkalis, high electrical and thermal conductivity, and good ductility. Available in plate, sheet, round bar and tubing with EN 10204 3.1 certification .

Alloy 800 vs Alloy 800H vs Alloy 800HT: A Comprehensive Comparison

Alloy 800 is the standard Ni-Fe-Cr alloy for service below 600°C. Alloy 800H features controlled carbon and coarse grain for enhanced creep strength above 600°C. Alloy 800HT further tightens Al+Ti control for maximum creep resistance up to 900°C+.

ASTM A240 316L Stainless Steel Plate UNS S31603 with Molybdenum Alloying and Chloride Resistance

Shaanxi Shangyou Stainless Steel Co., Ltd. supplies ASTM A240 316L stainless steel plate (UNS S31603, EN 1.4404). Mo 2.0-3.0%, Cr 16.0-18.0%, Ni 10.0-14.0%, C ≤0.03%. Tensile ≥485 MPa, yield ≥170 MPa. 2B/BA/No.4 finishes. Cold/hot rolled, custom cut. MTC 3.1.

ASTM A240 S32760 Super Duplex Stainless Steel Plate UNS S32760 with Tungsten Alloying and PREN >40

Shaanxi Shangyou Stainless Steel Co., Ltd. supplies ASTM A240 S32760 super duplex stainless steel plate (UNS S32760, EN 1.4501). W alloyed, Cr 24-26%, Ni 6-8%, Mo 3-4%, N 0.20-0.30%. Yield ≥550 MPa, tensile ≥750 MPa. PREN>40. Excellent seawater resistance. Custom sizes. MTC 3.1.

2 3 4 5 6 Next