|
Stainless Steel Angle Bar and Angle Iron in Metric and Inch Sizes
| MOQ: | 5Ton |
| Price: | Based on grade, size, surface, processing, quantity and current raw material market price. |
| Standard Packaging: | Standard seaworthy export packing with bundles, waterproof wrapping, pallets or wooden cases. |
| Delivery Period: | 7-15 |
| Payment Method: | L/C,D/A,D/P,T/T,Western Union |
| Supply Capacity: | Stock supply, regular production and custom manufacturing available. |
Shaanxi Shangyou Stainless Steel Co., Ltd. supplies stainless steel angle bar and angle iron in metric and imperial dimensions for distributors, fabricators, EPC contractors and equipment manufacturers. Available profiles include equal-leg, unequal-leg, hot-rolled, cold-formed and custom-fabricated L angles, subject to grade, section size and production-route confirmation.
| Item | Options |
|---|---|
| Grades | 304, 304L, 316, 316L, 321, 310S, 2205 |
| Profile | Equal, unequal and custom L angle |
| Units | Millimetres or inches |
| Typical Length | 3 m, 5.8 m, 6 m, 10 ft, 20 ft |
| Surface | Pickled, mill finish, No.4, brushed, polished |
| Processing | Cutting, drilling, slots, polishing |
| Documents | MTC 3.1, PMI and inspection reports |
Stainless steel angle has two legs joined at approximately 90 degrees. Equal angle has two nominally identical leg widths, while unequal angle provides a wider mounting or load-bearing face on one side. Hot-rolled angles normally have a visible internal root radius; fabricated or laser-fused sections may have sharper corner geometry.
Metric orders should be written as A × B × T × L, such as 50 × 50 × 5 × 6000 mm. Imperial orders should use one governing unit system, such as 3 × 2 × 1/4 inch. SI and inch-pound values should not be mixed unless the conversion and governing tolerance are clearly agreed.
Applications include machinery frames, process skids, platforms, food equipment, marine supports, chemical-processing structures, brackets, racks and architectural fabrication.
Shangyou can provide saw cutting, mitre cutting, holes, slots, surface finishing and export packing. Products can be marked by grade, heat number, size and piece number. Prices should identify whether settlement is based on theoretical or actual weight.
| Buyer Question | Answer |
|---|---|
| What is the difference between angle bar and angle iron? | They are commonly used as equivalent purchasing terms for L-shaped profiles. |
| Are metric and inch sizes both available? | Yes, subject to grade and manufacturing route. |
| Can equal and unequal angles be supplied? | Yes. |
| What information is needed for quotation? | Grade, standard, A × B × T, length, quantity and finish. |
| Can you cut to fixed lengths? | Yes. |
| Is PMI available? | Yes, for alloy verification. |
| Can holes and slots be added? | Yes, based on drawings. |
| Is MTC 3.1 available? | Yes, when specified before ordering. |
| What are the common lengths? | Common options include 3 m, 5.8 m, 6 m and 20 ft. |
| How are the angles packed? | In strapped bundles, waterproof wrapping or wooden cases. |
Send the required grade, equal or unequal profile, metric or inch size, thickness, length, quantity, surface finish, inspection documents and destination port. Shangyou will confirm stock or production route, weight basis, lead time and export packing. | REQUEST A QUOTE · SEND SIZE LIST OR DRAWING
