|
304 Stainless Steel Equal Angle 25x25x3mm for Light Fabrication
| MOQ: | 5Ton |
| Price: | Based on grade, size, surface, processing, quantity and current raw material market price. |
| Standard Packaging: | Standard seaworthy export packing with bundles, waterproof wrapping, pallets or wooden cases. |
| Delivery Period: | 7-15 |
| Payment Method: | L/C,D/A,D/P,T/T,Western Union |
| Supply Capacity: | Stock supply, regular production and custom manufacturing available. |
Shangyou Stainless Steel supplies 25 × 25 × 3 mm 304 stainless steel equal angle for light fabrication, equipment enclosures, decorative framing, brackets and general workshop use. Grade 304 is a general-purpose austenitic stainless steel with good fabrication characteristics.
| Item | Options |
|---|---|
| Grade | 304 / 1.4301 |
| Size | 25 × 25 × 3 mm |
| Type | Equal angle |
| Length | 3–6 m or cut length |
| Surface | Pickled, mill, brushed |
| Services | Cutting, holes and polishing |
The smaller leg width and 3 mm nominal thickness make this section suitable for light frames rather than heavy structural loading. Structural capacity must still be verified by the buyer’s engineer.
Applications include instrument frames, light guards, cabinets, displays, trim supports, food-service equipment and small brackets.
Cold-formed and hot-rolled versions may have different corner radii and surface conditions. The required process should be identified where appearance, fit-up or dimensional consistency is important.
Cut parts can be deburred, polished and individually packed. Protective film may be applied to polished surfaces where technically practical.
| Buyer Question | Answer |
|---|---|
| Is this suitable for heavy structural frames? | It is normally selected for lighter fabrication. |
| Can 1 m lengths be supplied? | Yes. |
| Can it be brushed? | Yes. |
| Are sharp corners available? | Corner geometry depends on the production route. |
| Can holes be punched? | Yes, subject to edge-distance requirements. |
| Is it food-grade? | Suitability depends on finish, fabrication and hygiene design. |
| Can it be welded? | Yes, using suitable procedures. |
| Is MTC available? | Yes. |
| Can it be packed with protective film? | Yes, for suitable polished products. |
| What quantity can be ordered? | MOQ depends on stock and processing requirements. |
| GET A PROJECT-SPECIFIC QUOTE FOR 304 ANGLE 25×25×3 MM Send full length or cut-piece requirements, quantity, finish, holes, deburring and protective-film needs. Shangyou will recommend hot-rolled or cold-formed supply based on fit-up, appearance and order volume. | REQUEST A QUOTE · SEND SIZE LIST OR DRAWING |
