|
Hot Rolled Stainless Steel Profiles in Angle Channel and T Sections
| MOQ: | 5Ton |
| Price: | Based on grade, size, surface, processing, quantity and current raw material market price. |
| Standard Packaging: | Standard seaworthy export packing with bundles, waterproof wrapping, pallets or wooden cases. |
| Delivery Period: | 7-15 |
| Payment Method: | L/C,D/A,D/P,T/T |
| Supply Capacity: | Stock supply, regular production and custom manufacturing available. |
Shaanxi Shangyou Stainless Steel Co., Ltd. supplies hot rolled stainless steel profiles for international B2B projects that require corrosion-resistant structural geometry, dimensional traceability and clear inspection documentation. Buyers should define the product by complete section dimensions rather than by a nominal name alone. For this page, the key RFQ geometry is mill section dimensions plus natural root/fillet radii. Length, quantity, surface condition, tolerance and the intended service environment should be stated before quotation so the actual production route can be selected.
The governing standard depends on how the section is produced. ASTM A276/A276M for applicable hot-rolled or extruded shapes; ASTM A484/A484M general requirements; EN 10088-3 for general-purpose European section delivery. ASTM A1069 applies if the ordered profile is laser or laser-hybrid welded. This distinction is important because a material delivery standard does not replace a structural design code, and a hot-rolled specification should not be automatically assigned to a cold-formed or welded built-up shape. The quotation and MTC should identify the agreed product route and standard revision.
Manufacturing may use hot rolling or extrusion of established mill shapes with natural fillet radii. The route affects corner radius, weld appearance, straightness, dimensional flexibility and cost. Hot-rolled or extruded profiles normally show natural mill radii; formed profiles show bend radii; laser-welded built-up sections can provide sharper corners and independent web/flange thicknesses. If the profile is architecturally exposed, specify weld dressing, grain direction, polishing and surface protection before production.
Grade selection should follow the environment and fabrication route. 304 is a practical general-purpose choice, 316L is preferred where chloride exposure or corrosive washdown is more relevant, and duplex 2205 can provide higher strength and stronger chloride-related corrosion resistance. Special grades such as 2507 or 904L should be offered only after confirming material availability, production route, MOQ and inspection requirements.
Typical applications include Structural supports, Industrial frames, Machine bases, Food equipment frames. Shangyou can coordinate cut-to-length, dimensional inspection, PMI, heat-number traceability and export packing, with project-specified NDT or third-party inspection where required. For an efficient RFQ, send grade, standard, mill section dimensions plus natural root/fillet radii, length, quantity, surface, manufacturing-route preference, inspection documents and destination. For load-bearing members, the project engineer must separately confirm design capacity and connection requirements.
- Structural supports
- Industrial frames
- Machine bases
- Food equipment frames
- Architectural supports
- General fabrication
Engineering note: Hot-rolled/extruded profiles have natural root and fillet radii. Do not depict them with perfectly sharp internal corners or promise arbitrary custom dimensions.
| Price Basis | Based on grade, geometry, manufacturing route, surface, length, quantity, processing, inspection and raw-material market conditions. |
|---|---|
| Supply / Lead Time | Confirmed in quotation according to stock, regular production or made-to-order status. |
| Packing | Bundled with protective wrapping and suitable supports; extra separators/protection for finished surfaces. |
| Payment | T/T, L/C or other agreed terms subject to quotation and contract. |
| After-Sales / Claims | Handled against contract specification, heat number, MTC, inspection records and agreed acceptance criteria. |
|
REQUEST A QUOTE | SEND SIZE LIST | UPLOAD DRAWING / MTO | REQUEST MTC 3.1 RFQ: Grade + Standard + Section Dimensions + Length + Quantity + Surface + Inspection + Destination |
|
1. How should I specify Hot Rolled Stainless Steel Profiles?
Send grade, governing standard, mill section dimensions plus natural root/fillet radii, length, quantity, surface, tolerance, manufacturing route and inspection/document requirements. A drawing is preferred for non-standard sections.
2. Which standard applies to Hot Rolled Stainless Steel Profiles?
ASTM A276/A276M for applicable hot-rolled or extruded shapes; ASTM A484/A484M general requirements; EN 10088-3 for general-purpose European section delivery. ASTM A1069 applies if the ordered profile is laser or laser-hybrid welded.
3. Can the section dimensions be customized?
Custom dimensions can be evaluated according to the selected hot rolling or extrusion of established mill shapes with natural fillet radii route. Feasibility depends on thickness, section stiffness, corner requirements, length and quantity.
4. Can the product be cut, drilled or slotted?
Cut-to-length and secondary fabrication can be quoted from drawings. State hole diameter, location, edge distance, tolerance, end condition and any deburring or surface-restoration requirement.
5. What surface finishes are available?
Mill, descaled/pickled, ground, brushed or polished finishes may be available depending on the section and starting route. Internal corners and welds can limit uniform decorative finishing.
6. Can PMI and MTC 3.1 be provided?
PMI and MTC / EN 10204 3.1 can be specified for alloy verification and traceability. State whether sampling, 100% PMI or third-party witness is required.
7. Can third-party inspection or NDT be included?
Yes, project inspection can be arranged when the method, extent, acceptance criteria, document format and witness/hold points are defined before production.
8. How is the product packed for export?
Long profiles are normally bundled with suitable supports and protective wrapping. Finished or visible surfaces may require separators, film or additional protection against abrasion.
9. Are all sizes and grades available from stock?
No. Stock, regular production and made-to-order status vary by grade, section and manufacturing route. Availability should be confirmed against the actual size list.
10. What determines the quotation price?
Price depends on alloy grade, section geometry, production route, length, quantity, surface finish, machining, inspection, packing and current raw-material conditions.
- Stainless Steel Structural Profiles
- Stainless Steel Channel
- Stainless Steel H Beam
- Stainless Steel I Beam
- Laser Welded Stainless Steel Profiles
