Found 90 Products For:

"stainless steel properties"

Duplex 2205 Stainless Steel Angle for Offshore Structural Supports

Duplex 2205 stainless steel angle for offshore supports, marine equipment and chloride-bearing structures. Custom equal or unequal sections with PMI, dimensional inspection and MTC 3.1.

Heavy Duty 304 Stainless Steel Angle 100x100x10mm for Frameworks

Heavy-duty 304 stainless steel equal angle in 100 × 100 × 10 mm for industrial frameworks, platforms and machinery supports. Available in standard or cut lengths with inspection and MTC.

316L Stainless Steel Unequal Angle 6x4x1/2 Inch for Chemical Plants

Heavy-section 316L unequal angle in 6 × 4 × 1/2 inch for chemical plants, process skids and industrial supports. Custom lengths, PMI and project inspection available.

321/321H Stainless Steel Seamless Pipe

ASTM A312 TP321 and TP321H stainless steel seamless pipe is a titanium-stabilized austenitic piping material for elevated-temperature, refinery, chemical and thermal processing systems. Available with solution annealing, custom cutting, end preparation, inspection and EN 10204

ASTM A240 410 Stainless Steel Plate UNS S41000 with High Hardness and Heat Treatability

Shaanxi Shangyou Stainless Steel Co., Ltd. supplies ASTM A240 410 stainless steel plate (UNS S41000, EN 1.4006). Martensitic grade, Cr 11.5-13.5%, C 0.08-0.15%. Tensile ≥415 MPa, yield ≥205 MPa. Hardenable via heat treatment. Magnetic. Good wear resistance. Custom sizes. MTC 3.1.

ASTM A240 15-5 PH Stainless Steel Plate UNS S15500 with Precipitation Hardening and High Strength

Shaanxi Shangyou Stainless Steel Co., Ltd. supplies ASTM A240 15-5 PH stainless steel plate (UNS S15500, EN 1.4545). Precipitation hardening martensitic grade, Cr 14-15.5%, Ni 3.5-5.5%, Cu 2.5-4.5%, Nb 0.15-0.45%. Tensile ≥1,170 MPa, yield ≥1,000 MPa. H900 to 46 HRC. Custom sizes

ASTM A240 420 Stainless Steel Plate UNS S42000 with High Hardness and Wear Resistance

Shaanxi Shangyou Stainless Steel Co., Ltd. supplies ASTM A240 420 stainless steel plate (UNS S42000, EN 1.4021). Martensitic grade, Cr 12-14%, C 0.15% max. Hardenable to 50 HRC. Tensile ≥515 MPa, yield ≥205 MPa. Good wear resistance. Magnetic. Custom sizes. MTC 3.1.

ASTM A269 Welded Austenitic Stainless Steel Tubing TP304L/TP316L for General Corrosion-Resisting Service

Shaanxi Shangyou supplies ASTM A269 welded austenitic stainless steel tubing for general corrosion-resisting and low/high-temperature service. Grades TP304L/TP316L. Heat treated. OD from 1/4in, WT from 0.020in. Hydro or NDE tested. MTC 3.1.

ASTM A312 TP321H Welded Stainless Steel Pipe Titanium Stabilized High Carbon for Creep Resisting Service

Shaanxi Shangyou supplies ASTM A312 TP321H welded stainless steel pipe for high-temp creep resisting service. Ti stabilized + 0.04-0.10% C. Heat treated. Hydro/NDE tested. NPS 1/8-48. MTC 3.1.

6 7 8 9 10 Next