Found 90 Products For:

"stainless steel tube"

ASTM A249 Welded Austenitic Steel Boiler Superheater Heat Exchanger and Condenser Tubes

Shaanxi Shangyou Stainless Steel Co., Ltd. supplies ASTM A249 welded austenitic steel tubes to boiler, superheater, heat exchanger, and condenser manufacturers. Grades TP304L/TP316L/TP321/TP347 and H grades for high temp. Heat treated. OD 0.125-12in, WT 0.015-0.320in. MTC 3.1.

ASTM A249 TP304 Welded Austenitic Steel Heat Exchanger and Boiler Tube

Shaanxi Shangyou supplies ASTM A249 TP304 welded austenitic steel tubes for boiler, superheater, heat exchanger and condenser applications. OD to 12in, WT 0.015-0.320in. Heat treated. Tension, flattening, flange, hydro/NDE tested. MTC 3.1.

ASTM A249 TP316L Welded Austenitic Steel Condenser and Heat Exchanger Tube

Shaanxi Shangyou supplies ASTM A249 TP316L welded austenitic tubes for condenser, boiler, superheater and heat exchanger applications. 2-3% Mo for pitting resistance, low carbon ≤0.035%, heat treated, OD to 12in, WT 0.015-0.320in. MTC 3.1.

ASTM A249 TP321H Welded Austenitic Steel Boiler Superheater Heat Exchanger Tube

Shaanxi Shangyou supplies ASTM A249 TP321H welded austenitic tubes for boiler, superheater, heat exchanger, condenser applications. Ti stabilized + 0.04-0.10% C, enhanced creep strength. Heat treated. OD 1/8-12in, WT 0.015-0.320in. MTC 3.1.

ASTM B704 Alloy 625 Welded Heat Exchanger Tube | Longitudinal Seam

Longitudinally welded Alloy 625 tube to ASTM B704 for boiler, heat-exchanger, condenser and other corrosion-resistant heat-transfer service. Buyers receive clear grade, condition, dimension, testing and documentation checkpoints; final supply is confirmed against the PO and…

Inconel 625 supplier

Inconel 625 (UNS N06625 / 2.4856) nickel-chromium-molybdenum-niobium alloy supplied as plate, sheet, coil, pipe, tube, bar, wire and fittings to ASTM/ASME standards, with cutting, machining, testing and EN 10204 3.1 certification.

Nickel Alloy 800HT | UNS N08811 | 1.4959 | Incoloy 800HT

Nickel Alloy 800HT (UNS N08811 / 1.4959) is a nickel-iron-chromium alloy with tightly controlled Al+Ti content (0.85-1.20%) for maximum creep rupture strength above 700°C. Available in plate, sheet, round bar and tubing with EN 10204 3.1 certification.

Nickel Alloy 600 | UNS N06600 | 2.4816 | Inconel 600

Nickel Alloy 600 (UNS N06600 / 2.4816) is a nickel-chromium-iron alloy with oxidation resistance to 1093°C and immunity to chloride stress-corrosion cracking. Available in plate, sheet, round bar and tubing with EN 10204 3.1 certification.

Nickel Alloy 800H | UNS N08810 | 1.4876 | Incoloy 800H

Nickel Alloy 800H (UNS N08810 / 1.4876) is a nickel-iron-chromium alloy with controlled carbon content (0.05-0.10%) for enhanced creep and rupture strength above 600°C. Available in plate, sheet, round bar and tubing with EN 10204 3.1 certification .

6 7 8 9 10 Next